74
81
81a
81a
81
86
32
2
33
32
35
73.1
73
5.
1.
Platform LPS
Pre-assembly Platform LPS with
Platform Cantilever Beam
1. Insert Fitting Pins (81) in Platform
Cantilever Beam (32) on one side and
place on Climbing Rail (2). Fix other
Fitting Pins (81a) and Cotter Pins (86)
in the fifth holes of the Climbing Rail.
(Fig. C1.12)
2. Align the Climbing Rails to the axial di-
mension of the platform.
3. Fix Platform LPS (33) to the Platform
Cantilever Beam (32) by inserting
Bolts ISO 7380 M10x25 (73) through
the Platform Cantilever Beam and se-
curing with Nuts M10 (73.1). Position
Nut (73.1) through the working open-
ing in the Platform Cantilever Beam.
(Fig. C1.13)
4. Turn the platform upwards over the
Fitting Pins (81a) and insert Fitting Pin
(81) and Cotter Pin in the Climbing
Rail. (Fig. C1.14)
Assembly of the platform extension
Mount the platform extension only after
road transport has taken place, see Sec-
tion C2 "Installation on Site" on Page 87.
Assembly of the toe boards
Mount the Toe Boards only after road
transport has taken place, see Section
C2 "Installation on Site" on Page 88.
Components
2
Climbing Rail-2 LPS
5
Rail Connector LPS
32
Platform Cantilever Beam LPS
33
Platform LPS
35
Platform Beam LPS
73
Bolt ISO 7380 M10x25
73.1
Nut M10
81
Fitting Pin Ø 21 x 120
86
Cotter Pin 4/1
C1 Pre-Assembly
Fig. C1.12
Fig. C1.13
Fig. C1.14
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration