Peri LPS Screen, Instructions For Assembly And Use, Page: 84 / 172

82
27
27
27
27
27
27
27
22
21 29 24
26
25
26
25
26
25
26
25
26
25
26
26
25
25
24 29 24 29
29 24
B
0
B
1
B
2
Mounting the Telescopic Screen
The Telescopic Screens are pre-assem-
bled and slid in to the width of the
Screen Elements B
0
(= transport dimen-
sion).
Wider enclosures can be completely as-
sembled on the construction site.
For assembling the Telescopic Screen
(22), Screen Adapter Combis LPS 60
(27) are mounted.
Optionally, depending on the wind load:
mount the Telescopic Screen (22) with
Edge Screen Adapter Telescope at the
top and bottom ends of the Climbing
Rail next to the Screen Adapter Single
(24).
Telescopic distance B
1
≤ 0.87 m.
(Fig. C1.23)
Alternative
Mount the Screen Element (21) with the
Screen Adapter Single (24) and Screen
Adapter Double (25).
Mount the Telescopic Screen (22) on the
Screen Element with the Screen Adapt-
er Telescope-2 LPS (26).
Optionally, depending on the wind load:
mount the Telescopic Screen (22) with
Edge Screen Adapter Telescope at the
top and bottom ends of the Climbing
Rail next to the Screen Adapter Single
(24).
Telescopic distance B
2
≤ 1.05 m.
(Fig. C1.23)
For assembling the Screen Adapter, only
use Nuts fitted with plastic clamping
rings!
Components
2
Climbing Rail-2 LPS
21
Screen Element DX LPS
22
Telescopic Screen DX LPS
24
Screen Adapter Single LPS 60
25
Screen Adapter Double LPS 60
26
Screen Adapter Telescope-2 LPS
27
Screen Adapter Combi LPS 60
29
Edge Screen Adapter Telescope
LPS
C1 Pre-Assembly
Fig. C1.23
Assembly principle:
with the Screen Adapter Combi (27)
with the Screen Adapter Double (25) and
Screen Adapter Telescope (26)
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration