91
63.1
63.1
63.2
63.2
21.1
63
65
63
66
21.1
C2 On-Site Assembly
Fig. C2.11
Fig. C2.11a
Fig. C2.11b
Gap Covering with Draw-in
Profiles
Close the gap, which is required for
climbing, between the Screen Elements.
See following pages for permissible
screen spacings.
Assembly
1. Mount Cover Clip Profile (63) on the
vertical frame (21.1) of the Screen Ele-
ment. First, place the short angle
(63.1) on the outside of the Screen El-
ement, then snap open the long angle
(63.2). (Fig. C2.11 + C2.11a)
2. Cut the Draw-In Profile LPS 20/55
(65) or 18/93 (63.4) diagonally at the
top and bottom according to require-
ments, which then allows the screw
in Step 4 to be used.
3. Insert Draw-In Profile into the Cover
Clip Profile.
4. Secure the Draw-In Profile at the top
and bottom using Drilling Screw ST
5.5 x 45 – TX30 GEO (66), in order to
prevent sliding out. Screw Drilling
Screw through Draw-In Profile, Cover
Clip Profile and Screen Element frame
(21.1). (Fig. C2.11b)
Apply formwork oil to Draw-In Profile to
make it easier to pull in.
Components
Item no.
21
Screen Element DX LPS
21.1
Screen Element Frame
63
Cover Clip Profile LPS 110
65
Draw-in Profile LPS 20/55
66
Screw ST 5.5 x 45 - TX30 710262
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration