88
82
83
84
84.1
27
27.5
37
37.1
37.2
Assembly of the Toe Boards
1. For platform extensions, pre-drill with
Ø 5 mm the Platform Covers in order
to screw on the Angle Connector (82).
Take into account an edge distance of
3 cm for the Toe Boards.
2. Secure Angle Connector (82) to Plat-
form Cover using SPAX 6 x 20 (83).
3. Fix Toe Boards (37, 37.1) to corners
with TSS Torx 6x60 (84.1).
4. Mount Toe Boards to Angle Connec-
tors using SPAX 5x35 (84).
4. Attach Toe Boards above the Climbing
Rail (37.2) by means of TSS Torx
4.5x60.
(Fig. C2.04)
Telescoping the Screen
1. Loosen the Nut (27.5) of the Screen
Clamping Plate on the Screen Adapter
Combi (27) or loosen the Screen
Adapter Telescope by a few turns.
2. If fitted, loosen the clamping screws
of the Edge Screen Adapter by a few
turns.
3. Extend the Telescopic Screen to the
required dimension. If the Screen
Adapter Telescope is used, push the
Telescopic Screen slightly downwards
on the outside. Lift Screen Frame
twice over the Ring Bolt of the Screen
Adapter.
4. Re-tighten all Bolts and Nuts.
(Fig. C2.05)
Components
27
Screen Adapter Combi LPS 60
37
Toe Board
82
Toe Board Angle 90°
83
SPAX 6x20 TX30
84
SPAX 5x25 SK-TX 25
84.1
TSS Torx 6x60
73
Oval-Head Screw ISO 7380
M10x25-10.9
72.1
Nut ISO 7040 M10
C2 On-Site Assembly
Fig. C2.05
Fig. C2.05a
View from below
Fig. C2.04
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration