126
90.1
2.1
98
10a
Step 5
1. Retract hydraulic cylinder until it tilts
backwards, claw (90.1) slides past the
Spacers positioned underneath and
engages again below. (Fig. D5.06)
Are all claws under the Spacers correctly
engaged?
Otherwise press down by hand.
If necessary, further retract hydraulic
cylinder.
Step 6
1. Extend hydraulic cylinder.
Claw grips Spacer and raises the
Climbing Rail.
2. By repeating Steps 3 to 6 several
times, the climbing unit is gradually
climbed upwards in increments of
50 cm.
If the hydraulic hoses become taut or
entangled, immediately stop the climb-
ing procedure and eliminate the prob-
lem!
Step 7 (Version 2)
When reaching the top climbing shoe:
1. Stop the climbing procedure.
2. Pull Climbing Rail inwards by means
of the Guide-in Tool RCS (98).
3. Close foldable skids of the top Slab
Shoe (10a). Deactivate climbing pawls.
4. Remove Guide-in Tool.
5. Continue climbing procedure.
(Fig. D5.06)
Components
2.1
Spacer
10
Slab Shoe-2 LPS
90.1
Claw
98
Guide-in Tool
D5 Moving with the Climbing Device
Fig. D5.06
Fig. D5.07
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration