Parker AC890PX Series, Engineering Reference

Page: 302 / 460

D-100
A p p e n d i x D : P r o g r a m m i n g
AC890PX AC Drive
Parameter Descriptions
POSITION PREF: 120.05 Default: 0.0000 Range: 0.0000 to 1.0000
The absolute position demand (1.0 = 1 load mechanical revolution).
VELOCITY PREF: 120.06 Default: 1.00 % Range: 0.10 to 300.00 %
This parameter defines the maximum velocity of the move, set in percent of maximum load speed.
ACCELERATION PREF: 120.07 Default: 1.00 % Range: 0.01 to 3000.00 %
This parameter defines the maximum acceleration of the move, set in percent of maximum load speed per second.
ABS POSITION PREF: 120.08 Default: —.xxxx Range: —.xxxx
This diagnostic displays the absolute position feedback (1.0 = 1 load mechanical revolution).
ACTIVE
PREF: 120.10 Default: FALSE Range: FALSE / TRUE
This diagnostic is TRUE to indicate Move Abs is active (i.e. the position demand is being provided by this block)
DONE PREF: 120.11 Default: FALSE Range: FALSE / TRUE
This diagnostic is TRUE to indicate the last Move Abs enabled has completed.
STATE PREF: 120.12 Default: 1 Range: See below
This diagnostic indicates the state of the Move Abs move.
Enumerated Value : State
0 : RESET the move to master is in a reset state and cannot be used.
1 : READY the move Abs is ready to be enabled
2 : POS AQUIRE the target position for the move is being acquired
3 : ALIGN the move is active
4 : DONE the move Abs is complete