Parker AC890PX Series, Engineering Reference

Page: 6 / 460

WARNING! - Ignoring the following may result in injury or damage to equipment
SAFETY
Where there is conflict between EMC and Safety requirements, personnel safety shall always take precedence.
•
Never perform high voltage resistance checks on the wiring without
first disconnecting the drive from the circuit being tested.
•
Whilst ensuring ventilation is sufficient, provide guarding and /or
additional safety systems to prevent injury or damage to equipment.
•
When replacing a drive in an application and before returning to use,
it is essential that all user defined parameters for the product’s
operation are correctly installed.
•
All control and signal terminals are SELV, i.e. protected by double
insulation. Ensure all external wiring is rated for the highest system
voltage.
•
Thermal sensors contained within the motor must have at least
basic insulation.
•
All exposed metalwork in the Inverter is protected by basic
insulation and bonded to a safety earth.
•
RCDs are not recommended for use with this product but, where
their use is mandatory, only Type B RCDs should be used.
EMC
•
In a domestic environment this product may cause radio interference
in which case supplementary mitigation measures may be required.
•
This equipment contains electrostatic discharge (ESD) sensitive
parts. Observe static control precautions when handling, installing
and servicing this product.
•
This is a product of the restricted sales distribution class according
to IEC 61800-3. It is designated as “professional equipment” as
defined in EN61000-3-2. Permission of the supply authority shall
be obtained before connection to the low voltage supply.