Parker AC890PX Series, Engineering Reference

Page: 54 / 460

3-32
C h a p t e r 3 : I n s t a l l i n g t h e D r i v e
AC890PX AC Drive
The following is a list of the Set-up parameters you may need to check before starting the drive. Set only the ones marked
with "x" for the intended mode of operation.
NOTE Parameters whose values are "product code dependent" will have a typical value for the size of unit. Where possible
(or required), enter an application-specific value for improved performance, otherwise use the typical value.
NOTE "PREF" is a parameter reference number used by the DSE 890 Configuration Tool.
SET-UP PARAMETERS
PREF 6911Display Default Brief Description
V/Hz SV CLV 4-Q PMAC
136.02 CONTROL MODE 0 : VOLTS / HZ
1 : SENSORLESS VEC
2 : CLOSED-LOOP VEC
3 : 4-Q REGEN
4 : PMAC*
Select the operating mode
for the drive.
* If PMAC control is
required, the motor wizard
feature in the 890 DSE
Configuration Tool MUST
be used to correctly set-up
the motor and feedback
device parameters. Failure
to do so may result in
damage to the servo
motor.
x
(0)
x
(1)
x
(2)
x
(3)
x
(4)
101.08 MAX SPEED product code dependent The maximum speed
clamp and scale factor for
other speed parameters (at
full process speed)
x x x x
100.02 RAMP ACCEL TIME 10.0 s Acceleration time from 0
rpm to MAX SPEED x x x x x
100.03 RAMP DECEL TIME 10.0 s Deceleration time from
MAX SPEED to 0 rpm x x x x x