Parker AC890PX Series, Engineering Reference

Page: 24 / 460

3-2
C h a p t e r 3 : I n s t a l l i n g t h e D r i v e
AC890PX AC Drive
Step 1: Mechanical Installation
IMPORTANT The AC890PX is classed as a "Complete Drive Module". DO NOT install external equipment into the AC890PX
enclosure.
Main Points
♦
This is a standalone unit.
♦
Provide adequate ventilation.
♦
Avoid excessive vibration.
NOTE Refer to Appendix C for information about EMC compliance.
1.1: Mounting the Drive
Prepare a clear, flat surface to receive the drive before attempting to move it.
It may be lifted by forklift either in it its final upright position, or lying on its back.
The drives are supplied with 4 lifting eyes fitted to the top of the drive enclosure for handling using a hoist.
During operation it must stand vertically on a solid, flat, horizontal, normally cool, non-flammable surface. With any tall unit
such as the AC890PX drive, it is advisable to secure the top to prevent it tipping over.
NOTE
The bottom wire entry version of the drive will sit on a plinth (allowing the cables to be fed through the bottom of the
drive). In this case, also secure the drive to the plinth.
Drive Weights
132kW 600lbs (272kg)
200kW 600lbs (272kg)
315kW 732lbs (333kg)
400kW 790lbs (360kg)