Parker AC890PX Series, Engineering Reference

Page: 116 / 460

6-20
C h a p t e r 6 : T h e K e y p a d
AC890PX AC Drive
Changing the Product Code (3-button reset)
On rare occasions it may be necessary to change the default settings by changing the Product Code. The Product Code is
detailed in Appendix E.
A special key combination is required to change the product code. This feature is only available at power-up as a security
measure.
The 3-button reset will take you to the POWER BOARD menu in the expanded SYSTEM menu (highlighted in the diagrams
below).
6901 Keypad Combination
Hold down the keys opposite:
-
Power-up the drive, continue
to hold for at least 2 seconds
t
E
PROG
HOLD
POWER BOARD
7.5kW 400V
for example
E
POWER BOARD
menu at level
SYSTEM POWER
LANGUAGE
DEFAULT TO 60HZ
REFORMAT FLASH
RESTART
EXIT TO BOOT
*
*
*
Select from the
expanded SYSTEM menu
see
diagram
below
M
IMPORTANT
We recommend the menus marked * above are only used by Parker SSD Drives or suitably qualified personnel.
NOTE
The LANGUAGE menu currently contains selection for ENGLISH only.