Parker AC890PX Series, Engineering Reference

Page: 107 / 460

C h a p t e r 6 : T h e K e y p a d
6-11
AC890PX AC Drive
Navigating the Menu System
On power-up, the Keypad defaults into the OPERATOR menu, timing out
from the Welcome screen. You can skip the timeout by pressing the
M
key immediately after power-up which will take you directly to the
OPERATOR menu.
The menu system can be thought of as map which is navigated using the
four keys shown opposite.
Keys
E
and
M
navigate through the menu levels.
The up ( ) and down ( ) keys scroll through the Menu and Parameter
lists.
Refer to “The Menu System Map” to see how the full menu is mapped.
HINT: Remember that because the Menu and Parameter lists are looped, the key can quickly move you to the
last Menu or Parameter in the loop.
Alert Message Displays
A message will be displayed on the Keypad when either:
•
A requested operation is not allowed:
The top line details the illegal operation, while the bottom line gives the reason or cause.
See example opposite.
•
The drive has tripped:
The top line indicates a trip has occurred while the bottom line gives the reason for the
trip. See example opposite.
Most messages are displayed for only a short period, or for as long as an illegal operation is tried, however, trip messages
must be acknowledged by pressing the
E key.
Experience will show how to avoid most messages. They are displayed in clear, concise language for easy interpretation.
Refer to Chapter 8: “Trips and Fault Finding” for trip messages and reasons.
scroll
scroll
exit to
previous
menu
next menu
NAVIGATING THE MENU
E
M