Parker AC890PX Series, Engineering Reference

Page: 269 / 460

A p p e n d i x D : P r o g r a m m i n g
D-67
AC890PX AC Drive
LOCAL CONTROL
This block allows the available modes of Local and Remote operation to be customised. It also indicates the selected mode.
You can only switch between Local and Remote modes using the Keypad. Refer to Chapter 8: “The Keypad” - The L/R Key.
Parameter Descriptions
SEQ MODES
PREF: 94.01 Default: 0 Range: See below
Allows the source of sequencing commands to be selected. Local is the Keypad, Remote is an external signal. The modes supported are:
Enumerated Value : Seq Mode
0 : LOCAL/REMOTE
1 : LOCAL ONLY
2 : REMOTE ONLY
REF MODES
PREF: 94.02 Default: 0 Range: See below
Allows the source of the reference signal to be selected. Local is the Keypad, Remote is an external signal. The modes supported are:
Enumerated Value : Ref Mode
0 : LOCAL/REMOTE
1 : LOCAL ONLY
2 : REMOTE ONLY
POWER UP MODE PREF: 94.03 Default: 1 Range: See below
Allows the power-up operating mode of the Drive to be selected. Local is the Keypad, Remote is an external signal, Automatic is the same mode as
at power-down. The modes supported are:
Enumerated Value : Power Up Mode
0 : LOCAL
1 : REMOTE
2 : AUTOMATIC
SEQ DIRECTION PREF: 94.04 Default: FALSE Range: FALSE / TRUE
When TRUE, direction is a Sequencing command.
When FALSE, direction is a Reference command.