A p p e n d i x A : O p t i o n s
A-3
AC890PX AC Drive
Removing the Control Board
WARNING
Disconnect all sources of power before attempting installation. Injury or
death could result from unintended actuation of controlled equipment.
Allow at least 10 minutes for the drive's capacitors to discharge to safe voltage
levels (<50V).
Caution
This option contains ESD (Electrostatic Discharge) sensitive parts. Observe static
control precautions when handling, installing and servicing this option.
1.
Undo the captive screws (A) securing Option A and Option B, if fitted.
2.
Undo the captive screws (B) located in the handles of the control board. Gently
pull down on the handles to withdraw the board from the drive, supporting any
attached option boards. Note that the boards are sliding in slots.
3.
Refer to the Option Card Technical Manual for fitting/wiring details.
4.
Fit the control board (with attached options) into the drive. Push the board gently
to engage the connectors on the rear edge of the control board with the drive's
connectors.
5.
Tighten the Option A and Option B screws, if fitted.
6.
Tighten the captive screws (B) located in the handles of the control board.
B
B
A
Summary of Contents for AC890PX Series
