Parker AC890PX Series, Engineering Reference

Page: 281 / 460

A p p e n d i x D : P r o g r a m m i n g
D-79
AC890PX AC Drive
MOTOR PMAC 1
SETUP::MOTOR CONTROL::MOTOR PMAC 1
Designed for PMAC Control Mode.
The MOTOR PMAC blocks (1 & 2) store all the parameters needed to run a PMAC Motor. These parameter values are entered automatically by the
DSE 890 Configuration Tool when the tool is used to select the motor type.
In order for the drive to control the motor the parameters marked
● MUST be set.
Parameter Descriptions
MANUFACTURER PREF: 134.01 Default: PARVEX Range:
Enter the motor manufacturer's name.
MODEL PREF: 134.02 Default: HS620EV Range:
Enter the motor name.
● CONSTRUCTION PREF: 134.03 Default: 0 Range: See below
Select the motor’s construction type.
Enumerated Value : Construction
0 : AXIS Standard motor.
1 : SPINDLE Spindle motor.
2 : TORQUE Direct torque motor.
ATMOSPHERE PREF: 134.04 Default: 0 Range: See below
Select the motor’s atmospheric details.
Enumerated Value : Atmosphere
0 : STANDARD Standard motor.
1 : EXPLOSIVE Motor built for explosive atmosphere (Ex).
MAX VOLTAGE
PREF: 134.05 Default: 400.00 Range: 200.00 to 640.00 V
Set the motor’s maximum ac input voltage (in Volts rms).