Panasonic Micro-Imagechecker AX40, User Manual

Page: 234 / 296

226
RS232C Co
mmunication
Cha
p
ter 1
1
• When a live image is displayed, a new image is re-registered after the image is imported.
• When a memory image is displayed, the current memory image (the last imported image) is
re-registered.
• AX40 will lose the images if power is removed before you save them. If you do not want to let
the device lose the images after power is removed, save the current settings by selecting
"Save" from the tool bar or by inputting the command "%M
C
R
" from the external device to
save the current setting data.
Reading Max/ Min binary level ([%L])
This is a command to read Max. and Min. values by specifying a binary group A-H. The binary level of
currently selected product type can be read on AX40.
Communication
Direction Command / Description
Sending
commands from
external device
% L ? ? CR
??: 01 to 08( To specify the number of binary level group)
Binary level group A B C D E F G H
Specified No. 01 02 03 04 05 06 07 08
Serial Settings- Command digit: Valid
% L ? ? , a a a , b b b CR
?? : 01 to 08 (Binary level group No.)
aaa : 000 to 254 (Binary level-min.)
bbb : 001 to 255 (Binary level-max.)
Response -
Normal operation
Serial Settings - Command digit: Fixed (4 digits)
% L ? ? a a a a b b b b CR
?? : 01 to 08 (Binary level group No.)
aaaa : 0001 to 0255 (Binary level group-Max.)
bbbb : 0000 to 0254 (Binary level group- Min.)
Response-Error
% U CR
Cause
• Command in the unspecified form or not provided was received.
Examples:
- %L1CR (any other checker number than 01 - 08 was specified.)
- %B01CR(not provided command)