Panasonic Micro-Imagechecker AX40, User Manual

Page: 165 / 296

157
Cha
p
ter 7
Calculation
, Anal
ysis and Out
p
ut of
Ins
p
ection Result
s
Contents of a Program
16 items and 102 characters are incorporated into Calculation 1
Example of Count Incorporatable
number
Program Result of Count
Item Up to 16 BW01+ 200 3 = "BW01", "+", "200"
Character Up to 102 BW01+ 200 8
Continuous Use of Brackets of Numeric Operators
Up to 3 of consecutive brackets can be included in the numeric calculation. You cannot register more
than four consecutive brackets.}
For example:
Correct: A = ( ( ( B + C) - D) + E) + F)
Wrong: A =
( ( ( ( B + C) - D) + E) + F) - G)
7.2.10 Error Message Displayed When You Set Numeric Calculation
When you set a numeric expression, the following messages may be displayed. In any case, an error is
included in the numeric expression. Recheck and correct it.
Message Display timing Description
E0061: Grammatical error
of the program At registration Grammatical error
For example,
“CA01 = -100 + BW01” should be “CA01 = (- 100) + BW01”.
E0062: Calculation error At copying
from the
existing
calculation
expression If the numeric calculation No. to which is copied is lower than
the one quoted to the numeric calculation.
For example,
Calculation expression which is to be copied:
CA05 = CA03 + BW01
Calculation expression No. to which is to be copied: CA02
(Thus, “CA02” becomes equal to “CA03 + BW01”, and the
quoted result of CA03 becomes the calculation results of the
previous inspection.)
E0064: Division by 0 At registration Denominator in the numeric expression is “0”.
E0066: Setting error At registration You attempted to incorporate an unspecified checker and
numeric calculation (CA) into the numeric expression and
register them.
E0067: Calculation
tolerance range error At registration A negative value and a square operator ($) are used
together.
For example,
CA01 = $ (- 100)