Palfinger PK 34002-SH P7, Original Operating Manual

Page: 117 / 260

Chapter 5 Safety equipment
111
Vehicles with additional stabilizers should better be supported using both stabilizers on the working
side. If only the crane stabilizer is used it is necessary to reduce more lifting power because of the
higher chassis torsion.
optimally supported crane inappropriately supported crane
HPSC in combination with Paltronic 150
Switch-off in limit situations
Upon reaching the safety limit allowable in the respective position (due to high load moment), the
system switches off all crane movements that impair the vehicle stability.
A graphic pops up and shows the situation and the status code (see ‘Pop-up graphics’ in 'Paltronic 150
control system’, chapter 5).
Example:
Only those crane movements can still be actuated that improve the vehicle's stability. On the display
they are indicated with arrows.