Palfinger PK 34002-SH P7, Original Operating Manual

Page: 146 / 260

Ancillary equipment
140
For how to move the pulley head that folds up in the lateral direction in working position / transport
position refer to ‘Ancillary equipment’, chapter 6.
x
Apply only light tension to the rope using the 'Raise rope winch' function.
Caution!
With active RTC the rope winch tensions the rope automatically when
a lever is being deflected (exception - ‘Slewing’). Do not reach into the
rope's range!
There is an acute risk of crushing and therefore a risk of injury!
x Switch RTC on.
x
Retract the extension booms. For the extensions choose a speed where RTC always winds the
rope under tension.
x
Move the Power Link rope winch (if available) in transport position (for procedure and operation
see ‘Rope winch’, chapter 6).
Caution!
Check after every folding/unfolding procedure:
That there is still rope in all deflection pulleys! Otherwise this may
considerably damage the rope and the load may fall down. In such a
case there is severe risk of injury or even fatal injury!
x Folding the crane in transport position (refer to ‘Folding the crane into transport position' in chapter
9).