Palfinger PK 34002-SH P7, Original Operating Manual

Page: 201 / 260

Chapter 8 Crane operation
195
Note!
Activating this function will only be possible if the below conditions
have been met.
Otherwise the effect described will occur.
Condition Effect if condition is not met
Remote control handset must be on.
Activation impossible (only possible via handset).
When activation is attempted on the crane’s operator
terminal, the following message appears:
Remote control handset must be in cable
operation mode.
The function is on, but not active. The symbol is
shown in red.
See point ‘Indication of the function status on the
main display’.
All stabilizers must be 100% extended.
Impossible to switch on this function. The following
error message appears:
The crane must not be in the blocked slewing
area.
Impossible to switch on this function. The following
error message appears:
Indication of the function status on the main display: