Palfinger PK 34002-SH P7, Original Operating Manual

Page: 169 / 260

Chapter 7 Preparing for crane operation
163
Stabilizing in general
The stabilizer outriggers and stabilizer cylinders must be extended or retracted separately on both
sides. To do so, alternately use both operating stations.
Fully extend / retract the stabilizer outriggers (mark must be visible).
If your crane is equipped with a stability control system refer ‘HPSC stability control’, chapter 5.
Move tiltable stabilizer cylinders into their position only after extending the outrigger beam.
The safety distance must be observed.
Danger!
Serious risk of getting crushed near the tiltable stabilizer! If the
operator or others are in the slew range of the stabilizer cylinder there
is acute danger of life for them.
Neither the operator nor bystanders are allowed to step in the
slew range of the stabilizer cylinder.