Palfinger PK 34002-SH P7, Original Operating Manual

Page: 103 / 260

Chapter 5 Safety equipment
97
Cable break:
Gets shown if a cable break has been identified.
All movements that in this situation can no longer be monitored or
are dangerous get blocked.
Remedy:
x Quit pop-up - if the error persists, contact
PALFINGER service partner.
Hardware / software fault:
Gets shown whenever there is a hardware or software fault.
Remedy:
x
Quit pop-up - if the error persists, contact
PALFINGER service partner.
Data bus fault:
Gets shown whenever a data bus fault occurs (device fails to
respond, communication etc.)
Example: A CAN connection or device is defective. Valve module
is too hot.
Remedy:
x
Quit pop-up - if the error persists, contact
PALFINGER service partner.
Plausibility sensor:
Gets shown if the control system contains an incorrect value of a
sensor.
All movements that would as a result of this be unsafe get
blocked.
Remedy:
x
Quit pop-up - if the error persists, contact
PALFINGER service partner.