Palfinger PK 34002-SH P7, Original Operating Manual

Page: 177 / 260

Chapter 7 Preparing for crane operation
171
Moving the tiltable stabilizer with pivot rods in supporting position:
Danger!
If the pin for the pivot rods is removed while the stabilizer cylinder
points upwards, the stabilizer will fall down uncontrollably. There is
risk of fatal injury!
Situation: After having moved out the stabilizer the distance between the support jack and the ground
is too small to push in the supporting plate.
Only pull out the pin for the pivot rods when the stabilizer cylinder points downwards.
Note!
Once the pin for the pivot rods is removed, the stabilizer cylinder can
only be lifted and lowered and not swivelled.
1) Pull out the linch pin (B) and pin (A) for the pivot rods.
(2) Lift up the stabilizer cylinder.
(3) Push the supporting plate (C) under the support jack.
(4) Lower the stabilizer cylinder.
Note!
Store the linch pin and pin for the swing gear in a safe place.