Palfinger PK 34002-SH P7, Original Operating Manual

Page: 121 / 260

Chapter 5 Safety equipment
115
Emergency operation after remote control failure
Remove the battery and insert the charged spare battery. Charge the battery you removed
immediately.
If it is still not possible to operate the crane via remote control, connect handset and receiver as shown
below.
If the remote control still does not work:
Set the key switch to manual operation.
Danger!
If the user cannot observe all stabilizer/crane movements from the
crane's emergency operation stand, there is risk of fatal injury.
If it is not possible to fully observe all
x
stabilization components;
x crane movements and the resulting load path;
x
loads;
from the emergency operator station during support and/or crane operation, the operator must be given
signals by a qualified signaller.
Crane with control valve on crane base
Operate the crane via manual control station. Any loading and unloading can be finished. Contact your
PALFINGER partner.