Palfinger PK 34002-SH P7, Original Operating Manual

Page: 213 / 260

Chapter 9 Ending operation
207
Secure the boom system sufficiently against side movements.
When the boom rests on the vehicle platform the vehicle's total height may change.
Note!
If the crane is equipped with a transport position indicator, monitor
the signal.
Retracting the stabilizers
Danger!
If the load arm is not in transport position while retracting the
supports the vehicle may tip over. This creates an acute risk of fatal
injury.
Retract the supports only when the boom system is in transport position.
If the vehicle is equipped with additional supports, they also must be retracted.
All safety notes of chapter 2 shall be observed.
Danger!
If the movement ranges of the supports are not completely in view of
the operator there is an acute risk of accident and danger to life.
When retracting the supports choose an operating station from where you may view the complete
support movement range. Always keep moving crane components in view. No persons and objects are
allowed to be in the movement area of the stabilizer outriggers / stabilizer cylinders.
The stabilizer outriggers and stabilizer cylinders need to be operated separately on both sides. To do
so, alternately use both operating stations.