manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 33 / 374

Share
Download
Nortel CC MIS User Manual Download Page 33

CC MIS Maintenance Guide                                                                                                                                  1-5

CC MIS 

CC MIS 

Release 5.2

Summary of changes and enhancements were made to CC MIS in Re-
lease 4.1:

• Support for the PowerPC (AIX) platform was added.

• The Switch Code field was added to Switch Link Configuration to 

handle duplicate DNs that are datafilled on multiple switches in a 
private network when using the CC MIS Networking feature. 
(Added in Release 4.01.)

• Added support for PVC (Permanent Virtual Circuit) X.25 connec-

tions to the switch for increased link throughput. These changes 
allow CC MIS to connect to the switch by means of the new IOM-
based high speed X.25 interface. (The following port parameters 
where added for X.25 links: Line Type, Clock, and Virtual Circuit 
Type. Enhanced the direct switch connection capability to allow a 
clock rate to be specified. Note that on the PowerPC, the DTE/
DCE setup for a port is determined from the hardware and cannot 
be changed in the Switch Link Configuration screen as it can on 
the 88K platform.These changes provide enhanced support for 
direct X.25 connections to the switch and to new IOM-based high 
speed (512KBps) X.25 switch interface.)

• An Analyze Configuration function was added to the storage cal-

culator.  Pressing this function key allows the storage calculator to 
analyze the values for your system based on data received from the 
switch and your system configuration.

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments