manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 229 / 374

Share
Download
Nortel CC MIS User Manual Download Page 229

CC MIS Maintenance Guide                                                                                                                                  13-5

CC MIS 

CC MIS 

Release 5.2

Changing Time Zone settings

Selecting the Changing Time Zone command displays a screen that al-
lows you to specify new time zone setting. The warning message
shown below is displayed to allow you to abort the action prior to
making any changes to the configuration.

Figure 3.8  Time Zone

Typing “Y” and pressing <Return> results in the actions listed in the
screen being performed. To abort this operation type “N” and press
<Return>.

This command changes
your configuration
and shuts down your
system.

It is highly recommended
that it be used only by
trained system
administrators. 

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments