manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 246 / 374

Share
Download
Nortel CC MIS User Manual Download Page 246

System Log Messages

CC MIS 

 

CC MIS 

 B-6                                                                                                                                                                     297-2671-545

Release 5.2

Failed to send request to database server

An error occurred when attempting to send a database request message to the database server.
(Action Code: B)

Failed to receive response from database server

An error occurred when attempting to read a database response message from the database server.
(Action Code: B)

Unexpected message received from database server

The program received a message from the database server that it did not expect. (Action Code: B)

File mapping failure -- file: xxxxx

Following a database enumeration request in which the resulting records were to be sorted, the program experi-
enced an error attempting to map the results file named in the “xxxxx” field into its address space. (Action Code: 
B)

File unmapping failure -- file: xxxxx

Following a database enumeration request in which the resulting records were to be sorted, the program experi-
enced an error attempting to unmap the results file named in the “xxxxx” field from its address space. (Action 
Code: B)

Language record parse error -- type: xxxxx

The program encountered a language record that it was unable to parse. The type of the record being parsed is 
named in the “xxxxx” field. (Action Code: B)

Main record parse error -- type: xxxxx, field: nn

The program encountered a main database record that it was unable to parse. The type of the record being parsed 
is named in the “xxxxx” field, and the field number which could not be parsed is given in the “nn” field. (Action 
Code: B)

Poll failed

The “poll” system call returned an error code. (Action Code: B)

I/O port open error - port: yyyy 

Indicates that the program was unable to open the I/O port identified by “yyyy”. The “system error” description 
should provide additional information as to the reason for the error. (Action Code: D)

I/O port setup error 

Indicates that the program was unable to properly set the communications parameters for its I/O port. The “sys-
tem error” description should provide additional information as to the reason for the error. (Action Code: D)

I/O port read error 

Indicates that the program was unable to read from its associated I/O port.   The “system error” description 
should provide additional information as to the reason for the error. (Action Code: D)

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments