manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 201 / 374

Share
Download
Nortel CC MIS User Manual Download Page 201

CC MIS Maintenance Guide                                                                                                                                  9-33

CC MIS 

CC MIS 

Release 5.2

Printing the link trace

The Print Link Trace command allows the user to print the untranslat-
ed hexadecimal Link Trace file.  

Perform the steps below to use the Print Link Trace command.

Printing the translated link trace

The Print Translated Link Trace command prints the translated Link
Trace file, rather than the untranslated hexadecimal file.  When this
command is  chosen, the Message Translator Filter screen will appear.
This screen will allow the user to choose which messages will be
translated and printed.  

Perform the steps below to use the Print Translated Link Trace com-
mand.

This command is only available if a trace file exists
and the maintenance printer has been configured.

Note:

1. Access the Diagnostics menu.

2. Enter t to access the Link Trace screen. 

    The Link Trace screen displays.

3. Press p and <Return>.

    The system sends the current Link Trace file to the maintenance printer.

Step 9-16:  Printing a link trace file

This command is available only if a Link Trace file
exists and the maintenance printer has been set.

Note:

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments