manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 192 / 374

Share
Download
Nortel CC MIS User Manual Download Page 192

9-24                                                                                                                                                                                    297-2671-545

CC MIS 

Release 5.2

INST PERCENTAGE

Percentage of CPU usage during the
last 5 seconds.

LIFE PERCENTAGE

Percentage of CPU usage since the
system was started.

AVG PERCENTAGE

Percentage of CPU usage since reset
(refer to Reset averages key below).

PERIOD

Time since reset (refer to Reset aver-
ages key below).

The lower portion of the screen dis-
plays the CPU Time and Percentage
Utilization values for the entire CC
MIS system.

The Reset averages key  resets the PE-
RIOD counter and the AVG PER-
CENTAGE counter for the program
the cursor is positioned on, for the to-
tal CPU utilization, or for all programs
and the total CPU utilization (depend-
ing on which is selected).

Table 9-6: CPU Utilization status  fields

Parameter

Description

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments