manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 316 / 374

Share
Download
Nortel CC MIS User Manual Download Page 316

System Log Messages

CC MIS 

 

CC MIS 

 B-76                                                                                                                                                                     297-2671-545

Release 5.2

Invalid next record offset - xxxx

The next record in the log file is located at an invalid offset. (Action Code:)

Invalid current day offset - xxxx

Invalid date in yyyy

And invalid date was encountered. (Action Code:)

Informational Messages

The following messages do not actually indicate an error condition but are used as notification of significant events 
which occur as part of normal operation. 

Processed xxxx dynamic debug messages

Maint processed xxxx dynamic debug messages. (Action Code: J)

Stopped logging dynamic debug messages

Maint stopped logging dynamic debug messages. (Action Code: J)

Fatal Error Messages

Fatal error messages are generated by a Maint process in response to conditions which prevent the process from con-
tinuing normal execution. This section lists these error messages. 

Invalid Group DN filter: yyyy

An invalid group DN filter was specified on the command line. (Action Code: B)

Invalid Position Id filter: yyyy

An invalid position Id filter was specified on the command line. (Action Code: B)

Invalid Agent Id filter: yyyy

An invalid agent Id filter was specified on the command line. (Action Code: B)

Unknown Option: yyyy

An unknown option was specified on the command line. (Action Code: B)

An output file must be specified.

An output file must be specified. (Action Code: B)

Position, agent, and group filtering are mutually exclusive

Only one type of filtering may be specified. (Action Code: B)

Size of translated file exceeds pre-determined size. 

The size of the link trace file has exceeded the maximum pre-determined size. (Action Code: B)

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments