manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 197 / 374

Share
Download
Nortel CC MIS User Manual Download Page 197

CC MIS Maintenance Guide                                                                                                                                  9-29

CC MIS 

CC MIS 

Release 5.2

When Link Trace translating is turned on, the hexadecimal notation in
the Link Trace file is interpreted into a readable format.  The translated
version of Link Trace can be used if a protocol guide is not available
to interpret the hexadecimal file.  The figure below is an example of
the untranslated Link Trace file.  

Figure 9.16  Untranslated Link Trace file example

The figure below is an example of the same messages in their translat-
ed form.

Figure 9.17  Translated Link Trace file example

In the figures above, messages marked by dsp are messages sent from
the downstream processor (CC MIS) to the ACD host switch.  Those
marked with swx are messages sent from the ACD host switch to the
downstream processor. The InvokedID acts as a sequence number that
associates individual operation invocations with operation results.  

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments