manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 223 / 374

Share
Download
Nortel CC MIS User Manual Download Page 223

CC MIS Maintenance Guide                                                                                                                                  12-3

CC MIS 

CC MIS 

Release 5.2 

During the SNMP transfer session, you are prompted for the following
information:

•

MIBs to be transferred - The options are to transfer just the sys-
tem MIB, just the partition MIB, or both. (If the partition MIB is 
selected, then one MIB file will be transferred for each partition 
defined on the CC MIS system.)

•

IP address - The IP address of the machine to which the files are 
to be transferred.

•

user ID - The user ID on the remote machine that is to receive the 
MIB files. 

•

target directory - The directory in which to place the MIB defini-
tion files on the remote machine. 

•

password - The password for the specified user on the remote 
machine.

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments