manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 156 / 374

Share
Download
Nortel CC MIS User Manual Download Page 156

8-14                                                                                                                                                                                    297-2671-545

CC MIS 

Release 5.2

The Partition Configuration with the Add Partition window and the
commands menu displayed is shown below.

Figure 8.10  Add Partition and Commands menus 

The commands in the Add Partition Commands menu are listed 
below.

Partitions must be defined using the Partition Configuration screen.
Partition names can be up to 16 characters in length. The initial set-
tings for a new partition are Mode=Setup and State=Stopped. The
partition type (local or NAP) is specified when adding a partition. The
NAP option will not be available to nodes that are not allowed to have
NAPs or if the Maximum limit of NAPs has been reached.

Table 8-6: Add Partition commands menu

Command

Description

Cancel

Aborts the Add Partition procedure.

Submit

Adds the partition to the Partition Configuration with and 
exits the Add Partition procedure.

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments