Nortel CC MIS User Manual Download Page 173

Page: 173 / 374

CC MIS Maintenance Guide 9-5

CC MIS

Release 5.2

Perform the steps below to perform a file transfer.

1. Access the Diagnostics menu.

2. Enter f to display the File Transfer screen.

The system displays the File Transfer screen.

3. Press the Options function key.

The system displays the files available for transfer.

4. Select a file and press <Return>.

5. If the file selected is not a Link Trace file or Init Data, then skip to step 8.

6. Press the Options function key.

The system displays the files available for transfer.

7. Select a Link Trace file and press <Return>.

8. Press the Commands function key.

The system displays the Commands popup menu, which includes the
Exit and Transfer commands.

9. Select Transfer and press <Return>.

The system displays a list of supported protocols (currently Kermit and
Zmodem).

10. Select the appropriate protocol and press <Return>.

11. The system displays further instructions depending on the protocol
selected in step 10.

Step 9-3: Performing a file transfer

Summary of Contents for CC MIS























































































































































































































































































































































































Search results

Summary of Contents for CC MIS

Reviews:

Nortel CC MIS, User Manual, Page: 173 / 374

Search results

Summary of Contents for CC MIS

Reviews: