manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 109 / 374

Share
Download
Nortel CC MIS User Manual Download Page 109

CC MIS Maintenance Guide                                                                                                                                  7-7

CC MIS 

CC MIS 

Release 5.2

Partition options

The Partition Options screen is used to specify a subset of capabilities
for use by a single partition. For changes to take effective immediate-
ly, the partition must be shutdown and restarted. (Exceptions to this in-
clude changes to: Nightly Backup, Max Supervisor Connections, and
Maximum Logins.)

Figure 7.3  Partition options screen

The values in the brackets [ ] next to maximum
fields indicates the range of available resources,
which is calculated by system wide limits minus the
resources already in use by other partitions. 

Therefore, the valid range for any field with numer-
ical value is the system limits defined in the option
of the distribution tape minus the sum of all the oth-
er partitions' values. The values of each field for all
partitions are added together and compared to the
system limit.

Note:

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments