Nortel CC MIS User Manual Download Page 202

Page: 202 / 374

9-34 297-2671-545

CC MIS

Release 5.2

Cancelling link trace printing

The Cancel Printing command cancels printing of the Link Trace file
if it is currently being printed.

Perform the steps below to use the Cancel Printing command.

Select different link

The Select Different Link command allows you to select a different
link for the trace commands.

1. Access the Diagnostics menu.

2. Enter t to access the Link Trace screen.

The Link Trace screen displays.

3. Press pt and <Return>.

The system displays the Message Translator Filter screen.

4. Enter p to proceed with the print command.

The system sends the translated Link Trace file to the maintenance
printer.

Step 9-17: Printing a translated link

trace file

The Cancel Printing command is available only if a
Link Trace file has been printed.

Note:

1. Access the Diagnostics menu.

2. Enter t to access the Link Trace screen.

The Link Trace screen displays.

3. Press c and <Return>.

The system cancels the current Link Trace print job.

Step 9-18: Cancelling link trace printing

Summary of Contents for CC MIS























































































































































































































































































































































































Search results

Summary of Contents for CC MIS

Reviews:

Nortel CC MIS, User Manual, Page: 202 / 374

Search results

Summary of Contents for CC MIS

Reviews: