Home
/
Nortel
/
CC MIS
/
User Manual

Nortel CC MIS, User Manual, Page: 146 / 374

Share

Page: 146 / 374

Nortel CC MIS User Manual Download Page 146

8-4 297-2671-545

CC MIS

Release 5.2

System Configuration

The system configuration screen contains system-wide data. This is
the first screen accessed when setting up a new system. Information
contained in this screen includes the system name, network parame-
ters, and the maintenance printer setup.

Security for a networked CC MIS is accomplished using a network
name. The Network Name field was added to System Configuration to
support the definition and security of the network. All nodes belong-
ing to a particular network must have the same Network Name.

The Network Name received in a message is examined in order to de-
termine if a message should be processed. Messages that are received
that do not have the correct Network Name are discarded.

Figure 8.3 System Configuration screens

The Network Name field appears when the Net-
working option is enabled. The system must be
down to edit this field.

Note:

187 & 197

PowerPC Platform

Platforms

«
...
144
145
146
147
148
...
»

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments