Nortel CC MIS, User Manual, Page: 309 / 374

CC MIS Maintenance Guide B-69
System Log Messages
CC MIS
CC MIS
Release 5.2
AGE Messages
Introduction
This section contains error messages generated by the Automatic Historical Data Compaction Process of the CC MIS
product. The CC MIS product runs on a Down Stream Processor, hence the error messages will NOT APPEAR IN
THE SWITCH LOG.
This section lists only those messages which are unique to the Automatic Historical Compaction Process. Messages
listed in STANDARD ERROR MESSAGES on page 1 may also be generated by this process.
Warning Messages
This section lists the warning messages that may be generated by AGE. These messages usually indicate an unusual
condition that can be appropriately handled by the process, and which does not prevent the process from continuing
execution.
Could not remove ager signal file “yyyy”
Age was unable to remove ager signal file. (Action Code: B)
Could not reduce database size
Age was unable to remove data to make more space. (Action Code: C)
Can’t read storage limits for yyyy yyyy
An error was encountered when reading the config db. (Action Code: B)
Could not create ager signal file “yyyy”
Age was unable to create the ager signal file. (Action Code: B)
Unable to lock HDB_AGED database
Cannot lock the AGED portion of the database. (Action Code: B)
Informational Messages
The following messages do not actually indicate an error condition but are used as notification of significant events
which occur as part of normal operation.
Compacting LOB data in: yyyy
This message is logged whenever the storage options are changed from store by agent, to store by group. (Action
Code: J)
Compacting LOB interval data in: yyyy
This message is logged when the interval data is compacted at midnight. (Action Code: J)
The following log messages are generated when AGE has been updated to new storage parameters. (Action Code: J)