manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 230 / 374

Share
Download
Nortel CC MIS User Manual Download Page 230

13-6                                                                                                                                                                                    297-2671-545

CC MIS 

Release 5.2

Making direct changes to the OS configuration

Selecting the Direct OS Configuration command displays a screen that
allows you to change any operating system parameter. The warning
message shown below is displayed to allow you to abort the action pri-
or to making any changes to the configuration.

Figure 3.9  Direct OS Configuration

Typing “Y” and pressing <Return> results in the configuration screen
being displayed. To abort this operation type “N” and press <Return>.

This command is used
to change your system’s 

It is highly recommended
that it be used only by
trained system
administrators. 

OS configuration.

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments