manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 31 / 374

Share
Download
Nortel CC MIS User Manual Download Page 31

CC MIS Maintenance Guide                                                                                                                                  1-3

CC MIS 

CC MIS 

Release 5.2

Features Added in Release 4

The following enhancements and changes were made to the Mainte-
nance Interface in Software Release 4 and are present in Release 5.1.

General changes to the Maintenance Interface include:

•

Physical Node Status - The Physical Node Status in View System 
Monitor has been added to assist the user in diagnosing CC MIS 
networking problems.

•

System Identification - Maintenance menus now include the sys-
tem name in the title, to ease identification of the system.

•

Login Support - The new Physical Network Login screen pro-
vides access for logging into other nodes in the CC MIS physical 
network.

•

Backup and restore - The Backup and Restore functions were 
modified to reflect the change in the name of the System Data-
base to the Definitions Database.

•

In Release 4.1, support was added for the PowerPC running the 
AIX operating system.

The changes made to Configuration section of Maintenance include:

•

Networked CC MIS Configuration - Two new customer options 
were added to the install tape to indicate whether or not a physical 
node is a Network Node and the maximum number of Network 
Access Partitions (NAPs) that may be configured on the node.

•

Network Name - This field was added to System Configuration 
for defining and securing the network.

•

New Configuration Commands - The Configuration screen was 
updated to include the Physical Network Configuration com-
mand.

•

Physical Network Definition - The nodes that comprise a 
CC MIS physical network are defined using the new Physical 
Network Configuration screen.

•

Switch Link Configuration - The maximum number of X.25 
links was increased to four (4). (The maximum is 12 for the Pow-
erPC in Release 4.1.) The Connection to Switch parameter was 
added to the link definition to indicate whether a live link uses 
modems or direct connection to connect to the switch. This 
parameter does not apply to simulator links. New fields on this 
screen include: Sync with Switch and Time Zone Adjustment.

Changes to the 
Maintenance Interface 
in Release 4.0

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments