manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 93 / 374

Share
Download
Nortel CC MIS User Manual Download Page 93

CC MIS Maintenance Guide                                                                                                                                  6-9

CC MIS 

CC MIS 

Release 5.2

Command menu options

The Switch Link Configuration screen has the following commands
on the commands menu:

 

•

Exit

•

Clear the form

•

Read an existing link definition

•

Save link definition

•

Delete an existing link definition

Live link

If live is chosen as the link type, the remainder of the fields are dis-
played on the screen. The switch link configuration screen for a live
link appears as shown in Figure 6-5.

Live link definitions are specified to obtain a live connection to the
DMS/MSL-100. 

Figure 6.5  Switch link configuration screen - live link

The Reinit Time field is used to specify a time (in 24-hour format) that
the system will request re-initialization from the switch. This field is
left blank when no daily re-initialization is required.  

The secondary link field is available only if the link redundancy option
is enabled on the load tape. It can be left blank if link redundancy is
not desired for this live link definition.

Time for the system is set and timezone differences are adjusted using
the Synchronize to Switch Time and Timezone Adjustment fields.

The Switch Code field allows 
three additional digits to be 
prepended to all directory 
numbers (DNs) received from 
the switch. This field is normally 
left blank. This field should be 
used if you are using the CC MIS 
networking feature in a private 
network where duplicate DNs 
appear on more than one switch. 
Using a unique switch code for 
each switch in the private 
network, CC MIS can make the 
duplicated DNs unique, thereby 
allowing the CC MIS 
networking feature to operate 
properly.

Switch Codes

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments