Nortel CC MIS, User Manual, Page: 254 / 374

System Log Messages
CC MIS
CC MIS
B-14 297-2671-545
Release 5.2
MAPA message queue found in IPC registry
Indicates that MAPA found its own message queue identifier in the list of message queues to be deleted upon
program or partition termination. MAPA automatically removes this object from the list.
(Action Code: L)
MAPA shared memory found in IPC registry
Indicates that MAPA found its own shared memory segment identifier in the list of shared memory segments to
be deleted upon program or partition termination. MAPA automatically removes this object from the list. (Action
Code: L)
Network response timeout - message type: xxxxxx (future)
No response was received within the allotted timeout period for a message sent to a remote node. The type of
message is “xxxxxx”. (Action Code: B)
No network time available - using nodal time (future)
Indicates that MAPA was unable to find any other nodes on the network during system startup and is therefore
using the current time of the system instead of setting the system time to the average time of all other nodes on
the network. (Action Code: J)
No object type in IPC register request from process nnn
The type of Inter-Process Communication (IPC) object was not specified in an IPC object registration request.
“nnn” is the process ID of the program which sent the request. (Action Code: B)
Nodal time adjustment failed (future)
MAPA was unable to make an adjustment to the nodal time in order to bring it in line with the network time.
(Action Code: B)
Node nnn (xxxxxx) not responding (future)
A node in the network is not responding to messages sent to it. “nnn” is the node ID number and “xxxxxx” is the
node name. (Action Code: L)
Node table is full (future)
No more node table slots are available for a new node. (Action Code: B)
Partition “nnn” already exists
A request was received to create a partition which already exists. (Action Code: L)
Program “nnn (xxxxxx)” asked to kill unknown service “[nnn.]PPP.ppppp”
MAPA received a request to kill a program that it does not know about. The program is identified by a 2 or 3 part
identifier as follows:
nnn Specifies the node ID on which the program is running. This part of the identifier will not appear if
the program is on the local node.
PPP Identifies the partition ID in which the program is running.
ppppp Identifies the Unix process ID of the program.
(Action Code: B)