manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 247 / 374

Share
Download
Nortel CC MIS User Manual Download Page 247

CC MIS Maintenance Guide

 

         

                      

 

                     B-7

System Log Messages

CC MIS 

 

CC MIS 

Release 5.2

I/O port write error

Indicates that the program was unable to write to its associated I/O port.   The “system error” description should 
provide additional information as to the reason for the error. (Action Code: D)

File open error - file: yyyy 

Indicates that the program was unable to open the file specified by “yyyy”. (Action Code: B)

Freopen error - file: yyyy 

Indicates that the program was unable to reopen the file specified by “yyyy”. (Action Code: B)

File create error - file: yyyy 

Indicates that the program was unable to create the file specified by “yyyy”. (Action Code: B)

File write error - file: yyyy 

Indicates that the program was unable to write to the file specified by “yyyy”. (Action Code: B)

Pipe creation error - pipe: yyyy 

Indicates that the program was unable to create the named pipe specified by “yyyy”. Named pipes are used for 
communicating between programs. (Action Code: B)

Pipe open error - pipe: yyyy 

Indicates that the program was unable to open the named pipe specified by “yyyy”. Named pipes are used for 
communicating between programs. (Action Code: B)

Pipe write error - pipe: yyyy

The program was unable to write to the named pipe specified by “yyyy”. (Action Code: B)

Pipe read error - pipe: yyyy

The program was unable to read from the named pipe specified by “yyyy”. (Action Code: B)

Memory allocation failure

The program was unable to allocate any additional memory. (Action Code: B)

Unable to create a new process

The program was unable to create a new process. This could indicate that there are a large number of defunct or 
runaway processes in the system. A system reboot may alleviate the problem. (Action Code: E)

Unable to start “yyyy” program

The program was unable to start the specified program. The “system error” description should provide additional 
information as to the reason for the error. (Action Code: B)

yyyy environment variable not found

The specified environment variable was not found. This indicates that the program encountering the error is 
being run in the wrong environment. This is a design error which should only occur during software develop-
ment. (Action Code: B)

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments