manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 157 / 374

Share
Download
Nortel CC MIS User Manual Download Page 157

CC MIS Maintenance Guide                                                                                                                                  8-15

CC MIS 

CC MIS 

Release 5.2 

Guidelines

Perform the steps below to access the Partition Configuration menu 
and add a NAP.

 

NAPs are used to access local partitions within the
network. After the NAP is added, select the Virtual
Network Configuration option from the Configura-
tion Options menu on the Partition Configuration
screen to specify which local partitions can be ac-
cessed by the NAP. (The Virtual Network Defini-
tion screen is described later in this chapter.)

Note:

Refer to Chapter 7 for information on adding Local
partitions.

Note:

1.  Access the Maintenance and Administration menu.

2.  Enter Configuration to access the Configuration main menu.

    The system displays the Configuration main menu.

3.  Select Partition Configuration to access the Partition 
     Configuration screen. 

4.  Press the Add Partition key and specify NAP as type.

5.  Enter name for partition to be added (up to 16 characters).

6.  Select Submit.

Step 8-2:  Adding a NAP

A NAP can only be set to Setup or Product mode.

Note:

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments