Nortel CC MIS, User Manual, Page: 103 / 374

CC MIS Maintenance Guide 7-1
CC MIS
CC MIS
Release 5.2
Introduction
CC MIS Release 5.x allows a CC MIS system to have up to multiple
partitions. To run Release 5.x in the same way that 2.x was run, set the
number of allowable partitions to one. The partitions described in this
section are referred to as local partitions since they reside on the phys-
ical VME host and store data for the CC MIS running on that partition.
Multiple partitions allow you to have partitions running in different
modes. One partition can be in product mode, while another can be
running in training mode. Converting a partition from one mode to an-
other does not affect other partitions. The partition configuration
screen is accessed from the Configuration menu shown in Figure 7-1.
Figure 7.1 Configuration menu
7
Section 7: Partitions (local)
Note: Refer to Section 8 for information on Networked CC MIS.
Partition configuration
Storage calculator and viewing
parameters
Master Privilege
Definition
Requirements for a run-
ning state
Connection parameters
Partition startup and
shutdown
Adding, deleting, and moving
a partition
Partition options
Data export file (setup to
receive files)
Use the information in
Section 8 to setup the
network and establish
network access partitions
(NAPs).
Networked
CC MIS
Regarding
Note: The Physical Network
Configuration option is only
displayed on a
networked node.