manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 264 / 374

Share
Download
Nortel CC MIS User Manual Download Page 264

System Log Messages

CC MIS 

 

CC MIS 

 B-24                                                                                                                                                                     297-2671-545

Release 5.2

Invalid argument error - type: nn 

The switch is reporting an invalid argument error of a type that is not recognized by the DSP. 'nn' gives the unrec-
ognized reason code contained in the error message. No action is taken by DMSLINK other than reporting the 
error. (Action Code: L)

Invalid arguments passed - ignored 

The DMSLINK process has been invoked with invalid arguments. The invalid arguments have been ignored. 
(Action Code: B)

Invalid NOP protocol version

The switch has rejected a logon request because the NOP protocol version requested by the DSP is invalid. 
(Action Code: I)

Invalid line in initialization file

At least one invalid line was found in the initialization file. (Action Code: B)

Invalid subpool password - LM request denied

A load management request has been denied because the subpool password as read from the configuration data-
base does not match the password datafilled on the switch for the specified subpool. This error condition is 
passed back to the CCLINK process in the response to its request. (Action Code: M) 

LINK TRACE FILE SIZE LIMIT REACHED

The link trace data file for this link has reached its maximum file size. Link data tracing has been terminated. 
(Action Code: J)

Link <x25 port> disabled with active circuit

The X.25 port identified by <x25 port> was disabled via the “X.25 Diagnostics” screen in the maintenance inter-
face while an active connection to the switch was present. The switch connection was dropped. (Action Code: G)

Lost connection to switch

DMSLINK has lost communication with the switch. (Action Code: L, F)

Lost sychronization on input data stream

DMSLINK has lost sychronization on the input data stream and will attempt to resychronize. (Action Code: L)

Network bind request local failure on <x25 port>

The X.25 card returned an error on the X.25 port identified by <x25 port> following an attempt to bind to the 
port. (Action Code: AC, F, B)

Network connect request local failure on <x25 port>

The X.25 driver returned an error when attempting to establish a connection on the X.25 port identified by <x25 
port>. (Action Code: F)

Network disconnect request local failure on <x25 port>

The X.25 card returned an error on the X.25 port identified by <x25 port> following a near end disconnect 
request. (Action Code: F)

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments