manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 78 / 374

Share
Download
Nortel CC MIS User Manual Download Page 78

5-6                                                                                                                                                                                    297-2671-545

CC MIS 

Release 5.2

If the system crashed and you need to restore all data, you restore the
configuration data first, then you restore both the partition/system da-
tabase and partition/data database to restore all data for all partitions.

Figure 5.4  Backup screen  

The Backup screen is shown with a sample ad hoc backup set. 
The default  "Backup?" value will be "yes" for the configuration data-
base. 

The default "Backup?" value for each partition is "yes" if the nightly
backup for the partition is enabled (see Partition Options in 
Chapter 7). 

The default for NAPs is “yes” for Definition Database only.

The lower portion of the screen displays information about the current
backup. Messages such as "Insert new tape" are displayed in this area.
The tape number and item being backed up are also displayed.

Backup screen commands

The following commands are accessed on the Backup screen by press-
ing the F1 soft-key.

There is no difference between manual and nightly
backups when all options are selected during a
manual backup.

Note:

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments