Home
/
Nortel
/
CC MIS
/
User Manual

Nortel CC MIS, User Manual, Page: 270 / 374

Share

Page: 270 / 374

Nortel CC MIS User Manual Download Page 270

System Log Messages

CC MIS

CC MIS

B-30 297-2671-545

Release 5.2

CCLINK Messages

Introduction

This section lists the error/warning messages that may be generated by CCLINK. These messages usually indicate an
unusual condition that has occurred within CC MIS software.

Warning Error Messages

This section lists the warning messages that may be generated by the CCLINK process. These messages usually indi-
cate an unusual condition that can be appropriately handled by the CCLINK process, and which does not prevent the
CCLINK process from continuing execution.

Invalid CC message received

CCLINK received an unknown message. (Action Code: B)

Configuration Control transaction log is corrupted.

The Configuration Control transaction log has become corrupted. (Action Code: B)

Switch connection aborted

The switch aborted it’s connection. (Action Code: B)

Switch connection has aborted; retrying...

The switch has aborted its connection, CCLink is attempting to reconnect. (Action Code: B)

Unable to send LM command to switch

The switch did not accept the load management command. (Action Code: B)

Fatal Error Messages

Fatal error messages are generated by CCLINK in response to conditions which prevent the process from continuing
normal execution. This section lists these error messages.

Subpool yyyy on link nnnn does not exist

The subpool yyyy does not exist on link nnnn. (Action Code: H)

«
...
268
269
270
271
272
...
»

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments