manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 211 / 374

Share
Download
Nortel CC MIS User Manual Download Page 211

CC MIS Maintenance Guide                                                                                                                                  10-3

CC MIS 

CC MIS 

Release 5.2 

The figure below is an example of the prompt for a single link. Enter
“y" to continue or “n" to quit. 

Figure 0.3  Configuration update prompt screen (single link) 

Use the steps below to run a configuration update.

______________________________________________
For single link:
______________________________________________

1. From the Configuration update screen, enter:

    a.  y to run the configuration update for the specified link(s)

        -or- 

    b. q to quit without running the update.
_______________________________________________
For multiple links:
_______________________________________________

1. From the Configuration update screen, enter:

    a.  the number of the desired link for the update
         and  press <RETURN> to run the update.

         -or-

     b. q to quit without running the update.

Step 10-2:  Running a configuration up-

date

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments