manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 311 / 374

Share
Download
Nortel CC MIS User Manual Download Page 311

CC MIS Maintenance Guide

 

         

                      

 

                     B-71

System Log Messages

CC MIS 

 

CC MIS 

Release 5.2

BAR Messages

Introduction 

This section contains error messages generated by the Backup and Restore Process of the CC MIS product. The CC 
MIS product runs on a Down Stream Processor, hence the error messages will NOT APPEAR IN THE SWITCH LOG. 

This section lists only those messages which are unique to the Backup and Restore Process. Messages listed in 
STANDARD ERROR MESSAGES on page 1 may also be generated by this process.

Warning Messages 

This section lists the warning messages that may be generated by BAR. These messages usually indicate an unusual 
condition that can be appropriately handled by the process, and which does not prevent the process from continuing 
execution. 

Nightly backup failed: yyyy

This message is logged whenever a restore is started through the maintenance Restore screen. (Action Code: J)

Nightly backup failed

This message is logged whenever the nightly backup fails after it has been successfully initialized. (Action Code: 
W)

Ad hoc backup failed

This message is logged whenever an ad hoc backup fails. (Action Code: W)

Restore Failed

This message is logged whenever a restore fails. (Action Code: AA)

Error starting mis_nite

An error occurred invoking the nightly cleanup script. (Action Code: B)

Get service status error: nn

A request to MAPA for service status information returned an error. The error code is specified by the “nn” field. 
(Action Code: B)

Service request for yyyy failed. Return value nn

A request to MAPA to start the program “yyyy” failed. The return value is specified by the “nn” field. (Action 
Code: B)

Terminating current nightly backup (timed out)

The nightly backup timed out and was terminated. (Action Code: AF)

Terminating current ad hoc backup (timed out)

An ad hoc backup timed out and was terminated. (Action Code: AF)

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments